168x Filetype PDF File size 0.32 MB Source: www.lin-tech.ch
Manual and Semi-automatic Analysers: Oxidation Oxidation Stability RBOT and TFOUT Bath echnologies SA ia Onorio Longhi 2 onic TV Linetr .lin-tech.ch – info@lin-tech.ch www CH-6864 Arzo,Mendrisio, Switzerland tel. +41 91 6300703, fax +41 91 6300719 ASTM D2112 of the conditions to which an oil may be LAB-100-371/50: silicone oil, can of 25 litres ASTM D2272 subjected in a gasoline combustion engine. T-AS96C: thermometer ASTM 96C ASTM D4742 This test method can be used for engine oils IP 229 with viscosity in the range from 4 mm2/s Accessories for ASTM D2272 (cSt) to 21 mm2/s (cSt) at 100°C, including LAB-101-974/A: glass container 175 ml ASTM D2112 ® re-refined oils. LAB-101-974/B: cover in Teflon Oxidation Stability of Inhibited Mineral LAB-101-974/D: spring made in stainless steel Insulating Oil by Pressure Vessel. IP 229 - Relative Oxidation Stability by as per ASTM D2272 This test method is intended as a rapid Rotating Bomb of Mineral Turbine Oil (RBOT) LAB-101-922/CU: copper wire catalyst method for the evaluation of the oxidation This method covers a rapid means 3 meters, pack of 5 pcs. stability of new mineral insulating oils for estimating the oxidation stability of new LAB-101-441/P: silicon carbide paper 100 grit, containing a synthetic oxidation inhibitor. turbine oils having the same composition. pack of 100 pcs. This test is considered of value in checking T-IP37C: thermometer IP 37C the oxidation stability of new mineral Art. LT/OS-197000/M insulating oils containing 2,6-ditertiary-butyl RBOT and TFOUT Bath Accessories for ASTM D4742 para-cresol or 2,6-ditertiary-butyl phenol, ASTM D2112 - D2272 - D4742 LAB-101-978/A: glass container ® or both, in order to control the continuity Bath made in stainless steel for four vessels LAB-101-978/B: cover in Teflon of this property from shipment to shipment. with capacity about 35 litres where the LAB-101-978/D: spring made in stainless steel The applicability of this procedure for use oxidation cylinders are turned at 100 rpm with as per ASTM D4742 with inhibited insulating oils of more than a 30° angle according to ASTM specifications LAB-101-978/E: aluminum insert made of 2024 12 cSt at 40°C (approximately 65 SUS Bath temperature range from ambient T-AS102C: thermometer ASTM 102C at 100°F) has not been established. to 199°C ± 0.1° Alternative Pressure Gauge ASTM D2272 Controlled by a digital thermo regulator PID LAB-102-001-DPS-RF: digital manometers Oxidation Stability of Steam Turbine Oils with over-temperature alarm and PT100A with record function by Rotating Pressure Vessel (RBOT). Each rotating place is independent · Autonomous battery powered instrument This test method utilizes an oxygen- with motor switching with digital display designed to record pressured vessel to evaluate the oxidation Drain tap pressure and temperature over long periods. stability of new and in-service turbine oils Accessories · High measuring accuracy, resolution having the same composition (base stock LAB-101-971: oxidation pressure vessel and robustness and additives) in the presence of water RBOT/RPOVT, made in stainless steel, · High data security due to the use and a copper catalyst coil at 150°C. complete with O-ring, stem, needle valve, of a non-volatile memory fast connection · Display of the actual pressure and ASTM D4742 - Oxidation Stability LAB-101-972: pressure gauge 0-200 psi, the record status of Gasoline Automotive Engine Oils div. 5 (for each vessel) · Recording of the pressure and temperature by Thin-film Oxygen Uptake (TFOUT) · Connectable to a Data software for PC via USB This test method evaluates the oxidation Accessories for ASTM D2112 · Pressure connection with G1/4” thread stability of engine oils for gasoline LAB-101-974/A: glass container 175 ml (other threads on demand) automotive engines. LAB-101-974/C: glass cover Optional Accessories This test, run at 160°C, utilizes a high LAB-101-922/CU: copper wire catalyst; LT/WM-227200: electric winding mandrel pressure reactor pressurized with oxygen 3 meters, pack of 5 pcs. for copper wire catalyst coiling, mounted along with a metal catalyst package, a fuel LAB-101-441/P: silicon carbide paper on solid base whit possibility to fix to bench, catalyst, and water in a partial simulation 100 grit, pack of 100 pcs. 220Vac 50/60 Hz
no reviews yet
Please Login to review.