Filetype PDF | Posted on 25 Jan 2023 | 2 years ago
Authentication
digital resources
138x Filetype PDF File size 0.78 MB Source: www.mff.cuni.cz
WDS'10 Proceedings of Contributed Papers, Part I, 99–103, 2010. ISBN 978-80-7378-139-2 © MATFYZPRESS
Descriptive Geometry Exercises of Advanced Level
V. Moravcov´a
Charles University, Faculty of Mathematics and Physics, Prague, Czech Republic.
Abstract. The aim of this article is to present some interesting descriptive
1
geometry exercises which were commonly taught at secondary schools and used
nd th
during the graduation examinations in the 2 half of the 19 century and
th
at the beginning of the 20 century. However, the same exercises may seem very
difficult for present time students. We will also have a look at the secondary
school system and graduation exams in connection with descriptive geometry in
the mentioned period.
Introduction
Descriptive geometry appeared as a subject in the timetable at secondary schools in 1850s
at realschules2, before that, geometry was taught only as a part of drawing and mathematics.
th
In the 19 century descriptive geometry was taught only at realschules, later also at real
gymnasiums3.
The first realschule in the Habsburg Monarchy was established in 1770 in Wien (Real–
th th
Handlung–Akademie). At the end of the 18 and at the beginning of the 19 century other
realschules were established but they served as commercial schools or preparatory courses for
studies at polytechnic schools. Until 1849 realschules were not conceptualized as secondary
schools, in Bohemia there was only one type of secondary schools (where graduation enabled
university studies) – gymnasium. Nevertheless, in 1849 the Exner–Bonitz reform was carried, a
part of which was the Entwurf der Organization der Gymnasien und Realschulen in Oesterreich
[Outline of the organization of gymnasiums and realschules in Austria]. In accordance with this
4
Outline realschules were changed and they started to exist as a kind of secondary schools. The
first realschule of this new type was established in 1849 in Prague (the First Czech Realschule
5
in Prague in Nov´e Mˇesto).
Teaching of descriptive geometry at realschules
In 1849 realschules were instituted as six-year secondary schools. The number of classes
was increased to seven in 1869 and in the same year the graduation exams were introduced at
some of these schools (and also at real gymnasiums). Descriptive geometry was taught three
th
lessons per week from the fifth to the seventh class (in the 20 century three lessons per week
in the fifth and sixth class and only two lessons per week in the last class but later it was also
taught in the forth class). The teachers of descriptive geometry were mostly graduates from
Prague (or Wien) Polytechnic.
The curriculum for the realschules was very often changed (oftener than for the gymnasi-
ums) but it had always had a large extent, there were taught parts which are not taught today
at universities, yet alone at secondary schools.
1In this article, the term secondary schools is used to refer to schools for students between the ages from
approximately 11 to 18 years.
2For this type of school the English term does not exist, therefore here is used the term realschule (realschules
– pl.) from German die Realschule (in Czech – ‘re´alka’). More see [Chmel´ıkov´a, 2009].
3Real gymnasium is a special kind of secondary school that connects realschule and gymnasium. The first real
gymnasium was established in 1862 in T´abor.
4 ˇ
More about history and development of realschules see [K´adner, 1929, 1931] and [Safr´anek, 1898, 1918].
5More about the First Czech Realschule in Prague in Nov´e Mˇesto see [V´avra, 1902].
99
´
MORAVCOVA:DESCRIPTIVEGEOMETRYEXERCISESOFADVANCEDLEVEL
Graduation examinations
The first graduation examinations at realschules were in 1869, from 1972 these exams were
set by law (before that graduation exams could only be taken at gymnasiums). At realschules
6
descriptive geometry was one of the obligatory subjects. Exams in it were written, they lasted
five hours. Students solved three or four exercises (generally three, but in some cases one of
them had two different parts – (a) and (b)), which were verbally assigned. The main topics,
which were often repeated, were different constructions in the orthogonal (Monge’s7) and the
th
central projection. Later, in the 20 century, there were rarely some exercises on the oblique
projection and the axonometry too, because these parts started to be taught.
Examples of descriptive geometry exercises
Theexamples,whicharegivenbelow,havebeenchoosenfromthetextbookZ´aklady deskrip-
tivn´ı geometrie [Elements of Descriptive Geometry] [Pithardt, Seifert, 1923, 1925] by Josef Pi-
thardt and Ladislav Seifert. This textbook was published with little changes in several editions
for realschules and real gymnasiums. We can find similar exercises in earlier textbooks on de-
scriptive geometry8 but in this one there is also the oblique projection. We will present three
typical exercises which were often used in graduation exams and from the present point of view
we can consider them as difficult exercises. These are:
• the lighting of polyhedrons or quadric solids of revolution (or other quadric solids),
• the intersection of solids,
• the lighting of groups of solids.
The lighting of polyhedrons or quadric solids of revolution or other quadric solids
The lighting of polyhedrons is usually constructed using light rays throught vertices of the
polyhedron and their instersections with planes of projections. These exercises do not require
a profound reflection but their solving is often lengthy and demands a high level of accuracy.
Moreover, the lighting of quadric solids (of revolution) demands the knowledge of other rules of
projection of these solids and their shadows.
In Figure 1, there is the lighting of a road–fence in the orthogonal projection, in Figure 2,
there is the same problem but it is constructed in the oblique projection. These exercises are
explained in the first volume (this textbook has four volumes in total) of the Pithard’s and
Seifert’s textbook on pages 85–87 [Pithardt, Seifert, 1923].
The Intersection of solids
If you find the intersection of solids, the solving of the problem depends on the kind of
these solids. The easiest case is the intersection of polyhedrons. In this case you have to find
6The others were the language of tuition (it was usually Czech or German), French, mathematics, homeland
study and physics; some of them were tested orally only. More about graduaiton examinations at secondary
schools see [Morkes, 2003].
7 th
Gaspard Monge, Comte de P´eluse, was born on 10 May 1746 in Beaunne. He became professor of mathe-
matics at M´ezi`eres in 1768 and professor of physics in 1771 at the same place. Later he was made professor at
´
the Ecole Polytechnique in Paris where he gave lectures on descriptive geometry. These lectures were published
in 1800 in the form of a textbook entitled G´eom´etrie descriptive. Because of this textbook Monge is considered
th
to be the founder of descriptive geometry. He died on 28 July 1818 in Paris.
8The first Czech textbook on descriptive geometry was Zobrazuj´ıc´ı mˇeˇrictv´ı [Descriptive Geometry] [Ryˇsavy´,
1862–3] by Dominik Ryˇsavy´. The second was Deskriptivn´ı geometrie pro vyˇsˇs´ı ˇskoly re´aln´e [Descriptive Geometry
for Higher Realschules] [Jarol´ımek, 1875–7] (which was also translated into Bulgarian and it had five editions
th
in Czech) and the last textbook on descriptive geometry written in the 19 century was Deskriptivn´ı geometrie
ˇ
pro vyˇsˇs´ı tˇr´ıdy ˇskol stˇredn´ıch [Descriptive Geometry for Higher Classes of Secondary Schools] [Sanda, 1877] by
ˇ
Frantiˇsek Sanda. More about these descriptive geometry textbooks see [Chmel´ıkov´a, 2009].
100
´
MORAVCOVA:DESCRIPTIVEGEOMETRYEXERCISESOFADVANCEDLEVEL
Figure 1. The lighting of a road–fence in the orthogonal projection.
Figure 2. The lighting of a road–fence in the oblique projection.
the meeting points of the edges of the first solid with the faces of the next solid and conversely.
The exercise with two quadric solids (of revolution) is less easy. In this case we usually find
the meeting points of two concurrent lines which lie on these solids (the first line on the first
solid, the second line on the second solid) but only in case the solids are cylinders or cones (of
revolution), or if you like they are not solids but surfaces created with movement of a line. In
case the solids are not created by a moving (rotating) line, we have to use some auxiliary planes,
circles or similar.
In Figure 3, there is the intersection of two oblique cylindrical surfaces. This exercise is
published in the third volume of Pithard’s and Seifert’s textbook on page 60. In the textbook
there are other similar exercises, mainly on the intersections of cylinders and cones of revolution.
101
´
MORAVCOVA:DESCRIPTIVEGEOMETRYEXERCISESOFADVANCEDLEVEL
Figure 3. The intersection of two oblique cylindrical surfaces.
The lighting of groups of solids
In exercises on the lighting of groups of solids there are combined both of the above–
described problems – the lighting of solids and the intersection of solids. Except we find shadows
on planes of projection, we have to find the way one of the solids shadows on the next solid. In
case the solids are not polyhedrons, it can be a very difficult exercise.
In Figure 4, there is an exercise on the lighting of a cylinder of revolution (with very short
high) and a cone of revolution. Both of them shadow on the planes of projection, moreover, the
cylinder shadows on the cone. Therefore we have to find the intersection of the light cylindrical
surface (defined by the cylinder of revolution and by the direction of light rays) with the cone
of revolution. We find this exercise in Pithard’s and Seifert’s textbook on pages 63–65.
Conclusion
When we confront the above exercises with the concrete exercises assigned during the
graduation exams, we can see that almost every year at every realschules students had to solve
at least one of the above–mentioned types of exercises. For example, in the assignments for
the graduation examinations at the First Czech Realschule in Prague in Nov´e Mˇesto in the
period 1871–1900, there were used six exercises on the lighting of polyhedrons, more than
twenty exercises on the lighting of quadric solids (of revolution) and thirteen exercises on the
intersection of quadric solids (of revolution) or on the lighting of a group of solids. Moreover,
many of these exercises were demanded to construct in the central projection.
Aswecansee,onehundredyearsegolearningofdescriptivegeometry atrealschules wasnot
easy for students. At the present time, not only secondary school sudents would probably have
difficulty solving graduation exams exercises but also some graduates from technical universities.
102
no reviews yet
Please Login to review.
